Open HardwareAssembly Instructions
Guides for installation and assembly of the LulzBot line of products made by Aleph Objects, Inc.
Guides for installation and assembly of the LulzBot line of products made by Aleph Objects, Inc.
Instructions and guides for maintaining and replacing items.
Instructions for calibrating extruders
Follow the steps within to pack and ship your LulzBot TAZ 6 safely!
Follow these instructions to level the X-axis on a TAZ 6.
Instructions on how to replace the hotend on a LulzBot Mini 2 Desktop 3D Printer
Mini Aerostruder Hotend Replacement
Instructions for removing a link from the Mini v1.04 (Gladiola) X-Axis Cable Chain
Directions for replacing the X axis motor on a LulzBot Mini
Directions for replacing a Y motor on a LulzBot Mini
Directions for replacing a LulzBot TAZ X Axis Stepper Motor
A guide on replacing the cables in the bed harness for the Lulzbot Mini 1.03 and earlier
Directions for replacing a LulBot Mini Hexagon Hot End
Directions for replacing a LulzBot V2 Hexagon Hotend
Instructions for installing the LulzBot TAZ 4-5 Complete Heat Bed Harness to your LulzBot TAZ 4 or 5
TAZ Aerostruder Hotend Replacement
Instructions for upgrading the motherboard of the TAZ 6 from a RAMBo version 1.3L to version 1.4
Instructions on how to replace your v3 dual thermistors
Get the perfect first layer for improved part adhesion and print quality by adjusting the height of the tool head on your LulzBot Mini's Z-axis.
Walkthrough on applying the updated Marlin firmware.
Directions for replacing a Y axis on a TAZ.
Instructions for installing Thermal Gap Filler Kit on the LulzBot Mini 2 during Einsy replacement
This set of instructions will take you through the replacement of the print head on the LulzBot Mini.
This guide will take you through the replacement of worn or damaged wiper pad mounts.
This is a guide for replacing the wiper pad on the LulzBot Mini.
Adding required libraries to an existing Arduino IDE installation.
Guide for installing a new PET sheet on your TAZ 3D printer heated bed
This set of instructions will take you through the replacement of your LulzBot Mini bed
This set of instructions will take you through the replacement of the PEI on the LulzBot Mini.
Installing the required drivers to use your 3D printer on the Windows operating system
Instructions for how to replace bent or broken molex connectors
This guide is for existing LulzBot TAZ 1-2 users, performing the upgrade from a 12V powered system to a 24V system.
Instructions for replacing the heating element or temperature sensor on a budaschnozzle hot end.
How to build Hexagon Hotend kit- Adapter Harness [EL-HR0072]